over 199 € gratis (inden for Danmark)
Shotgun Microphone incl. Rycote Windshield Set DPA Microphones has joined forces with Rycote® to develop the DPA 4017 Shotgun/Rycote® Windshield Solution. The strong suspension and windshield solution has been designed specifically to take the DPA 4017B shotgun mic’s compact size and light weight into consideration. This kit provides everything an outside broadcaster, journalist or location film maker could need for clear, directional sound, regardless of the weather and environmental conditions.
Equipped with a highly directional supercardioid pickup pattern, obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection, the DPA 4017B is a short and exceptionally lightweight shotgun microphone that truly measures up to DPA’s impressive reputation for accuracy, clarity, and musicality. Designed for a broad range of applications, the phantom powered 4017B is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast/ENG/film booming, and even studio recording environments.
Extensive research and development has been undertaken to optimize the sound coming from the sides and behind the microphone. Minimizing the often very un-linear response of a shotgun microphone due to its side lobes is one of the key accomplishments of the 4017B. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.
Features: Directional characteristics: Supercardioid, lobe-shaped Principle of operation: Pressure gradient, with interference tube Cartridge type: Pre-polarized condenser Frequency range: 20 Hz to 20 kHz Frequency range, ± 2 dB: 70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz Sensitivity, nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A)) Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 80 dB(A) Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak Dynamic range: Typ. 119 dB Max. SPL, peak before clipping: 152 dB Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz Output impedance: < 150 ohm Cable drive capability: 100 m (328 ft) Output balance principle: Signal balanced Common Mode Rejection Ratio (CMRR): > 40 dB Power supply: 48 V Phantom power (± 4 V) Current consumption: 4.5 mA Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase Color: Matte black Weight: 68 g (2.4 oz) Microphone diameter: 19 mm (0.75 in) Capsule diameter: 19 mm (0.75 in) Microphone length: 212 mm (8.3 in) Output voltage, RMS: > 1.8 V Polarity: +V at Pin 2 for positive sound pressure Temperature range: -40 °C to 45 °C (14 °F to 113 °F) Relative Humidity (RH): Up to 90 %
Included in the box: DPA 4017B Shotgun premounted in Rycote® Suspension with the Rycote® Windshield DPA XLR cable DPA Windscreen for 4017B Rycote® fur windjammer Rycote® XLR holder Rycote® brush
!!!! 3 years Music Store warranty !!!!
!!!! 30 days Money-Back guarantee !!!!
Hver måned trækker vi lod bland alle indsendte varebedømmelser om et gavekort til en værdi af 500 EURO!
Tillykke til vinderen af august: Etienne Laget, Vaires sur Marne (FR)
Forrige måneds vinder (juli): Wim Rutjens, Tegelen (NL)
Hvis du vil, kan du bedømme dette produkt. Du har desuden hver måned mulighed for at vinde et værdibevis til indkøb.