Din feedback

Doepfer A-138E Quad Three-Way Crossfader/ Mixer/ Polarizer

(0)
Vare: SYN0003614-000
Aktiver sociale medier
The Doepfer A-138E Eurorack Quad 3-Way Crossfader/Mixer/Polarizer Module is a Eurorack quad 3-way crossfader/mixer/p...  Alle vareoplysninger

80,00 € ca. 595,46 DKK
inkl. lovpligtig moms, ekskl. Forsendelsesomkostninger
På lager
Køb mere.
Spar mere!

Tilføj flere varer til din indkøbskurv for at kvalificere til mængderabat!

Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

DOEPFER A-138e Quad Three-Way Crossfader/ Mixer/ Polarizer

The Doepfer A-138E Eurorack Quad 3-Way Crossfader/Mixer/Polarizer Module is a Eurorack quad 3-way crossfader/mixer/polarizer module, that contains 4 identical units for multiple different applications. The module A-138e contains four identical units that can be used for different crossfading, mixing and polarizing applications.

Polarizer: only input A is used, inputs B and C are unconnected. In this case the sub-unit works as a polarizer. In the ccw position of the control the signal connected to input A appears at the output, in the cw position the inverted signal, in the centre position no signal appears at the output. 

Two-way Crossfader type 1: Two different signals are connected to the inputs A and C, switch is in the left position (switching contact of input B is open). In this case the sub-unit works as two-way crossfader between the two signals connected to the inputs A and C. In the centre position both signals appear with the same level.

Two-way attenuator: Two different signals are connected to the inputs A and C, switch is in the right position (switching contact of input B is connected to GND). In this case control is used to attenuate signal A (between ccw and centre position) or signal C (between centre and cw position). In the centre position no signal appears at the output. Similar to the two-way crossfader but without signal in the centre position.

Three-way Crossfader: Three different signals are connected to the inputs A, B and C. In this case the sub-unit works as three-way crossfader. In the ccw position only signal A appears at the output. Between ccw and centre position a mix of the signals A and B appears at the output. In the centre position only signal B appears at the output. Between centre and cw position a mix of signals B and C appears at the output. In the cw position only signal C appears at the output.

Two-way Crossfader/Polarizer type 2: Two different signals are connected to the inputs A and B. In the ccw position only signal A appears at the output. Between ccw and centre position a mix of the signals A and B appears at the output. In the centre position only signal B appears at the output. Between centre and cw position a mix of signals B and inverted signal A appears at the output. In the cw position only the inverted signal A appears at the output. Useful for CV mixing: e.g. signal A = ADSR, signal B = LFO. In this case one can fade between ADSR ... LFO + ADSR ... LFO ... LFO - ADSR ... - ADSR.

The main features of the Doepfer A-138E Eurorack Quad 3-Way Croxxfader/Mixer/Polarizer Module include:

  • Three-way crossfader/mixer/polarizer
  • Contains four identical units that can be used for different crossfading, mixing and polarizing applications
  • Width: 16 HP/ 80.9 mm
  • Depth: 30 mm (measured from the rear side of the front panel)
  • Current: 10 mA

Funktioner:

  • Producent: Doepfer
  • TE/HP: 16
  • Dybde (cm): 3,0
  • Type of Modul: Misc. Tools