Din feedback

Doepfer A-167 Analog Comparator

(2)
Vare: SYN0003200-000
Aktiver sociale medier
The Doepfer A-167 Eurorack Analogue Comparator is a Eurorack analogue comparator module, which compares analogue vol...  Alle vareoplysninger

60,00 € ca. 446,50 DKK
inkl. lovpligtig moms, ekskl. Forsendelsesomkostninger
leverbar på mellemlangt sigt, leveringsdato: 23-12-2017
Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

DOEPFER A-167 ANALOG COMPARATOR

The Doepfer A-167 Eurorack Analogue Comparator is a Eurorack analogue comparator module, which compares analogue voltages and derives a Gate signal. The A-167 is a module that compares analogue voltages and derives a gate signal. The state of the gate output (low/high) depends upon which of the voltages is higher. It is possible to compare two external voltages (+In and -In) or an external voltage (+In or -In) with a manually adjustable value (Offs. control). Both analogue inputs +In and -In are equipped with an attenuator.

Internally the module generates the voltage k1*(+In) - k2*(-In) + Offset and und sets or resets the gate output depending on the result of this internal voltage (>0V or <0V). The factors k1 and k2 represent the manual attenuators. An LED shows the current state of the gate output. The Gap control is used to adjust a so-called "hysteresis". As long as this control is set to zero the switching levels for both on and off state of the gate signal are identical. As soon as the Gap control is turned up the switching levels for on and off state fall apart and a so-called hysteresis appears. Normal and inverted gate outputs are available. In addition the internal voltage k1*(+In) - k2*(-In) + Offset is available at the Analogue Sum socket. Consequently the module can be used as subtractor and offset generator too.

Applications: Generation of gate signals depending upon analogue voltages. E.g. a gate signal that depends upon the present value of a LFO (triangle), ADSR or random signal can be generated and used to control a voltage controlled switch that on the other hand switches different control voltages or audio signals. The module can even be used to add the free-running mode to each ADSR ,e.g. A-140 similar to a LFO but with separate controls for rising and falling edge and exponential waveforms - in contrast to the linear waveforms of a LFO.

The main features of the Doepfer A-167 Eurorack Analogue Comparator include:

  • A module that compares analogue voltages and derives a gate signal
  • Both analogue inputs +In and -In are equipped with an attenuator
  • Width: 8HP / 40.3mm
  • Depth: 40mm (measured from the rear side of the front panel)
  • Current: 20mA

Funktioner:

  • Producent: Doepfer
  • TE/HP: 8
  • Dybde (cm): 4,0
  • Type of Modul: Misc. Tools