Din feedback

Joemeek Three Q Channel Strip

(0)
Vare: REC0008246-000
  • SOLD OUT!
Aktiver sociale medier
The JoeMeek THREE Q Channel Strip. Affordable mono Mic/Instrument Pre with compressor and EQ. The JoeMeek THREE Q ...  Alle vareoplysninger
Joemeek

This product is no longer available!
Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

JoeMeek threeQ

The JoeMeek THREE Q Channel Strip. Affordable mono Mic/Instrument Pre with compressor and EQ.

The JoeMeek THREE Q is like having one channel of a professional recording studio in a small box. It takes a microphone or instrument, amplifies it, compresses and equalizes it ready to be recorded. Simple to use yet extremely powerful, the threeQ will bring out the best in any microphone or instrument and give the gloss of a professional studio production to all your performances. As well as recording it will also be found useful for live work.

The main features of the JoeMeek THREE Q include:

  • Affordable mono Mic/Instrument Pre with compressor and EQ
  • Input impedances: Mic: 1.2kohm; Line: 20kohm
  • Pre-amp overall gain: 0dB to 60dB
  • Common mode rejection: 70dB
  • Equivalent input noise: -128.5dBu (unweighted)
  • Distortion: 0.001% (below Compressor threshold)
  • Frequency response: 10Hz to 70kHz (-3dB)
  • Maximum input before clipping: Mic: +19.5dBu; Line: +44.5dBu
  • Headroom before clipping: +19.5dBu
  • Compressor threshold: -6dBu to +20dBu (variable)
  • Compressor ratio: 5:1 (typical)
  • Compressor attack time: 1 msec to 100 msec (adaptive)
  • Compressor release time: 0.1 sec to 3 sec (adaptive)
  • Nominal output levels: +4dBu/-10dBv
  • Output impedance: 75ohm
  • Output Level switch: 12dB attenuation
  • Noise Floor: -85dBu (typical, with ~40dB mic gain)
  • VU Meter: 8 segment bargraph
  • Power supply: 12V ac mains adaptor
  • Power consumption: 12W
  • Mechanical: 220W x 44H x 180D (overall)
  • Weight: 1 kilo
  • EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
  • LF Frequency : 80Hz fixed
  • MID Frequency : 300Hz to 5kHz variable
  • HF Frequency : 12kHz fixed