Din feedback

Joemeek oneQ2 Channel Strip opt/Coax - out, WC in/out

(0)
Vare: REC0009812-000
  • SOLD OUT!
Aktiver sociale medier
The JoeMeek oneQ2 Mono Channel Strip is a single channel combining Mic Pre (featuring Cinemag microphone transf...  Alle vareoplysninger
Joemeek

This product is no longer available!
Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

JoeMeek oneQ2

The JoeMeek oneQ2 Mono Channel Strip is a single channel combining Mic Pre (featuring Cinemag microphone transformers), four band EQ, a Joe Meek "signature" optical compressor, De-Esser, and Enhancer. This is a master channel like no other.
Housed in a 2u chassis, the elegantly sculpted faceplate is intelligently laid out, with clear, easy to read legends and a large analog VU meter.
Also included are 24bit, 96K A/D converters with word clock input and output.
The microphone input transformer is permanently assigned to the "Mic" Input. The "IRON" switch now optionally sends the "Line" input through the transformer, to add some colouration to Line sources.
The input "GAIN" control now operates over the range 18dB to 60dB, with improved resolution in the crucial 25dB-45dB range. Microphone inputs up to +4dBu can be accommodated without distortion.
The "INSTRument" input now has a gain range of 0dB to +40dB.

The main features of the JoeMeek oneQ2 Mono Channel Strip include:

  • Input impedances: Mic: 1.2kohm; Line: 20kohm
  • Pre-amp overall gain: 10dB to 60dB (variable)
  • Common mode rejection: 70dB
  • Equivalent input noise: -128.5dBu (unweighted)
  • Distortion: 0.001% (below Compressor threshold)
  • Frequency response: 15Hz to 70kHz (-3dB)
  • Maximum input before clipping: Mic: +21dBu; Line: +45dBu
  • Headroom before clipping: +21dBu
  • Compressor threshold: ∞dBu to -20dBu (variable)
  • Compressor ratio: 1:1 to 10:1 (variable)
  • Compressor attack time: 1 msec to 100 msec (adaptive)
  • Compressor release time: 0.1 sec to 3 sec (adaptive)
  • Nominal output levels: +4dBu/-10dBv
  • Output impedance: 100ohm
  • Output Level switch: 12dB attenuation
  • Noise Floor: -85dBu (typical, with ~40dB mic gain)
  • VU Meter: Analogue movement
  • Power supply: 115V / 230V ac mains, 50/60Hz
  • Power consumption: 30W
  • Mechanical: 482W x 88H x 220D (overall)
  • Weight: 3 kilos
  • High Pass Filter: 12dB per octave cut below 80Hz
  • EQ Boost & Cut: +/-15dB (zero phase-shift bell response)
  • LF Frequency: 80Hz/120Hz switchable
  • LMF Frequency: 200Hz to 2kHz variable
  • HMF Frequency: 1kHz to 6kHz variable
  • HF Frequency: 7kHz/14kHz (selectable)
  • EQ “Q”: 0.9 (1.6 octaves