Din feedback

Rebel Technology Logoi Eurorack Module

(0)
Vare: SYN0004387-000
Aktiver sociale medier
The Rebel Technology Logoi Eurorack Synth Module is a voltage controlled clock divider, counter, and delay. The &Lam...  Alle vareoplysninger
Rebel Technology

219,00 € ca. 1.630,08 DKK
inkl. lovpligtig moms, inkl. Forsendelsesomkostninger
leverbar på mellemlangt sigt, leveringsdato: 27-12-2017
Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

REBEL TECHNOLOGY Logoi Eurorack Modul

The Rebel Technology Logoi Eurorack Synth Module is a voltage controlled clock divider, counter, and delay. The Λ?γοι (or "Logoi" in English) is a voltage controlled clock divider, counter, and delay. It subdivides and adds time, creating organic, evolving signatures. The Λ?γοι brings movement and life to the trigger signal, from a subtle swing to bizarrely complex and intricate rhythms.

The functions of Λ?γοι are split with division on the left, and addition on the right. The right side operates either in Counter mode, by adding clocks, or Swing mode, by adding a time delay. The mode is set by the centre switch. The module has CV inputs (top jacks) and trigger outputs (middle left/right jacks) for each side, and a combined trigger output (centre bottom jack) which gives the output of both operations: divide and add.

The trigger input (bottom left and right jacks) is shared between division and addition. There is also a reset input (middle centre jack) and manual reset switch (push switch up). There are three LEDs indicating the divided and added output to the left and right, and the combined output in the centre.

The Divide mode toggles its output every n clocks, where n is the divisor. The divisor is set with a manual (top knob) and CV level control, in a range from 1 to 32. With the switch in the down position, the additive side functions as clock counter in the Count mode. The counter will output a trigger signal every m clocks, where m is the addend. The range is from 1 to 32 clocks, with 16 in the centre position. The combined output will divide and count. If i is the incoming clock, n the divisor, and m the addend, then it will output a a trigger signal every i/n + m clocks.

With the switch in the centre position, the right side adds a time delay to the input, which is the Swing mode. The amount of delay, or swing, ranges from 0ms to around 1000ms. In Swing mode, the combined output passes all clocks through until each time the divisor triggers, when it adds a time delay. The result is that every n-th clock is delayed by m, where m is the amount of swing and n is the divisor.As in Count mode, if the divisor frequency is greater than the delay time, the combined output will not trigger. In Swing mode, this is determined by the combination of input clock frequency and delay time.

The main features of the Rebel Technology Logoi Eurorack Synth Module include:

  • Modes: Divide, Count & Swing
  • Dimensions
    • Height: 3U / 128.50mm
    • Width: 10HP / 50.50mm
    • Depth: 20mm
    • Weight: 140g
  • Power
    • 16-pin Doepfer/Eurorack
    • Requires +5v
    • PTC fuse and diode protected
    • +12v: < 15mA
    • -12v: < 10mA
    • +5v: < 25mA
  • Impedance
    • Outputs: < 1.1k
    • Inputs: > 100k
  • Voltage Range
    • Output low: 0v
    • Output high: 5.1v

Funktioner:

  • Producent: Rebel Technology
  • TE/HP: 8
  • Type of Modul: Clock-Tool