Din feedback

Tascam VL-S5 2-way Monitor Speaker active

(0)
Vare: REC0011949-000
Aktiver sociale medier
The Tascam VL-S5 Active Studio Monitors creates a high resolution stereo monitoring for anything from home to profes...  Alle vareoplysninger

233,00 € ca. 1.734,52 DKK
inkl. lovpligtig moms, inkl. Forsendelsesomkostninger
På lager
Køb mere.
Spar mere!

Tilføj flere varer til din indkøbskurv for at kvalificere til mængderabat!

Standardforsendelse

over 199 € gratis (inden for Danmark)

Vi giver dig gerne gode råd!
Vores team
Export
export@musicstore.de
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Aktiver sociale medier for at dele indhold. Så bliver data først overført til sociale netvørk, når du virkelig ønsker det.

Tascam VL-S5

The Tascam VL-S5 Active Studio Monitors creates a high resolution stereo monitoring for anything from home to professional studios. The natural response delivered by the Kevlar 5.25" woofer and 1" silk dome tweeter is immediately noticeable. Each driver is powered by a separate amplifier, and with a crossover frequency of 3.2kHz increases the efficiency of both drivers and a moving phase increase the mid range frequencies.  The VL-S5 delivers a 60-22KhZ even frequency reproduction.

When producing your music it is crucial to hear your audio tracks as purely as they were recorded. Audi transients are quickly responded to, and the high-strength Kevlar cone combined with the silk tweeter makes for a faithful reproduction of your tracks. The Kevlar cone reproduces the full frequency spectrum without any distortion. If softer materials were used, they can bend and deform during playback which gives you an inaccurate idea of your mix. The silk tweeter gives you accurate playback without any harsh tones.

The VL-S5 is bi-amplified, meaning each component is driven by its own seperate amplifier. This makes for the cleanest possible playback, whilst eliminating any possible interaction between other electrical components. The 3.2kHz crossover frequency was chosen after a long stream of testing, ensuring that a seamless response is achieves. This is higher than most conventional monitors, and this has been achieved because of the  Kevlar drive, making for a truer reproduction of hip-hop, EDM, acoustic, rock and many others.

A balanced XLR/TRS combo input reduces noise when interfacing audio components. Noise can come from many other electrical in the signal chain and can get mixed with signals during transmission between components on a cable. A balanced connection can reduce and even eliminate this noise.

The VL-S5 is shielded, preventing magnetic interference from affecting sensitive components. With magnetic shielding, the VL-S5 can be setup near devices such as computer displays and hard drives without worry.

The main features of the Tascam VL-S5 Active Studio Monitors include:

  • 5.25-inch Kevlar cone woofer/ 1-inch silk dome tweeter
  • LF 40W and HF 30W Bi-amplified Power
  • Specially-tuned 3.2kHz crossover circuitry
  • Magnetic shielding to prevent adverse effects to computer displays
  • XLR/TRS balanced input connector
  • RF interference protection circuit, output protection circuit, and heat protection circuit
  • Volume control
  • Dimensions (W x H x D): 176 x 255 x 200 mm
  • Weight: 5.2 kg 

Funktioner:

  • Producent: Tascam
  • Konstruktion: 2-Way
  • aktiv/passiv: Aktiv
  • Watt (RMS) Total: 70
  • Woofer (tommer): 5,25
  • Input 1: XLR
  • Input 2: 6,3 mm jack
  • Near- / Mid- / Far-Field: Nearfield
  • Magentisk skærmet: Ja
  • Frekvensrespons fra (Hz): 60
  • Frekvensrespons på (Hz): 22.000
  • Watt (RMS) Bass: 40
  • Watt (RMS) Diskanthøjttaler: 30
  • Basrefleksåbning: Skjold
  • Krydsningsfrekvens (Hz): 3.200
  • Vægt (kg): 5,2
  • Højde (mm): 255
  • Bredde (mm): 176
  • Dybde (mm): 200