DPA SCO61B00-N53 53cm Necklace LoSens,schwarz, Micro-dot

The d:screet™ 4061 Heavy Duty Miniature Omnidirectional Microphone, Lo-Sens offers a very clean, detailed and natural sound quality.

The d:screet™ Heavy Duty Mic Series contains our toughest miniature microphones. Made for situations where you require maximum security and where visual size of the mic is less important. The d:screet™ Heavy Duty Mic Series features a stainless steel housing, a heavy-duty cable relief and a thick 2.2 mm (1.6 in) cable.

The d:screet™ 4061 Heavy Duty Miniature Omnidirectional Microphone, Lo-Sens was originally designed for use with wireless systems in theater, television and close-miked instrument applications. Because of its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup.

This microphone is acoustically identical to the d:screet™ 4060 Heavy Duty Miniature Omnidirectional Microphone, Hi-Sens, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market.

It is up to the user to decide on the correct placement to achieve the desired timbre. The mic can handle 144 dB peak before clipping, allowing the microphone to be used even for snare drums, guitar/bass speaker cabinets or other high SPL sound sources

• Plug and play mounting
• Consistent output
• Minimal visual impact
• Modular adapter system fits most professional wireless systems

Specifications:

• Directional characteristics: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarised condenser element with vertical diaphragm
• Frequency range, ± 2dB: High boost grid: 20Hz – 20kHz, 10dB boost at 12kHz
• Sensitivity, nominal, ± 3 dB at 1kHz: 6mV/Pa; -44dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS, 468-4: Typ. 38dB (Max 40dB)
• S/N ratio, re. 1kHz at 1Pa(94 dB SPL): 68dB(A)
• Total Harmonic Distortion (THD): <1% up to 123dB SPL peak; <1% up to 120dB SPL RMS sine
• Dynamic range: Typ. 97dB
• Max. SPL, peak before clipping: 144dB
• Output impedance: 30 – 40Ω
• Cable Drive capability: Up to 300 m (984 ft)
• Power supply: For wireless systems: Min 5V to max. 50V through DPA adapter. With DPA XLR adapter: 48V phantom power ±4V.
• Connector: MicroDot
• Microphone weight: 17g incl. cable and MicroDot connector
• Microphone diameter: 12.7mm (0.5in)
• Necklace length: 47cm and 53cm options (18.5 and 20.7in)
• Cable length: 1.1m (3.6ft)
• Cable diameter: 1.6mm (0.06in)
• Colours available: Black, Brown and White
• Polarity: Polarity increasing sound pressure produces positive going voltage on MicroDot pin.