Markbass Little Mark Tube Bass Guitar V alve Amplifier Head

Markbass Little Mark Tube Bass Guitar Valve Amplifier Head, 500 Watts, 4 Ohms, 4- Band EQ, Variable Pre-Shape Filter, Vintage Loudspeaker Emulator.

The Markbass Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp...or a mix of both!

On the front panel there are also two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or 1/4" input.

Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four band EQ, VLE and VPF filters, line out level control, pre/post EQ switch for the XLR out (on rear panel) and mute control (push-pull on the master volume knob).

Markbass Little Mark Tube features include:

• INPUT 1 impedance 500 Kohm, max. voltage 15 Vpp
• INPUT 2 (Balanced XLR/1/4" combo) balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
• EFFECT RETURN impedance 33 Kohm, max. voltage 10 Vpp
• GAIN 1 and 2 -60 dB to +23 dB range
• Tube and solid state gain can be mixed
• Other controls: MASTER VOLUME, LINE OUT LEVEL
• GROUND LIFT switch on rear panel
• PRE/POST EQ switch on rear panel
• MUTE push/pull on master knob
• LOW EQ center frequency: 40 Hz; level: ±16 dB
• LOW MID center frequency: 360 Hz, level: ±16 dB
• HIGH MID center frequency: 800 Hz, level: ±16 dB
• HIGH center frequency: 10 kHz, level: ±16 dB
• VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut)
• VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut)
• LINE OUT balanced XLR, max. voltage 20 Vpp
• EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ)
• TUNER OUT unbalanced, max. voltage 2 Vpp
• SPEAKER OUT speakon/1/4" combo, 1/4"
• WEIGHT 6.55 lbs / 2.97 kg
• Dimensions: DEPTH 10.1 in. / 25.6 cm, WIDTH 10.87 in. / 27.6 cm, HEIGHT 2.8 in. / 7.1 cm
• OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm