Your Feedback

Neumann DMI 2 portable Interface

(1)
Item: REC0005040-000
  • SOLD OUT!
Neumann DMI 2 portable Interface Product Image
Enable Social Media
The Neumann DMI-2 portable is a digital microphone interface designed for field recordings and other on-the-roa...  All product info

This product is no longer available!
We are happy to help you!

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information - Neumann DMI-2 portable

Portable Interface

The Neumann DMI-2 portable is a digital microphone interface designed for field recordings and other on-the-road applications.

It supports two digital microphones and allows adjustment of the Gain, Pre Attenuation and Low Cut filter settings at the device. The front panel display shows the selected gain and, by means of bar graphs, shows the current signal level and any gain reduction. Of course, these functions can also be operated via the RCS software.

Microphone presets can be stored inside the DMI-2 portable and recalled for use in the field.

The main features of the Neumann DMI-2 Portable include:

  • 2x AES42 IN (XLR3F),
  • 1x AES/EBU (AES3) OUT (XLR3M),
  • 2x Word Clock IN/OUT (BNC),
  • 1x Remote Control (USB)
  • Indicators: Monochrome display, bar graphs for gain, level and gain reduction, LED’s for Power, Battery status, Synchronization and Valid
  • Phantom power (DPP): +10 V, max. 250 mA per channel, short-circuit proof
  • Remote control data: Pulses (+2 V), superimposed on the phantom power, approx. 750 bits/s or 9,600 bits/s (depending on the microphone)
  • Microphone synchronization: AES42 – Mode 2 (synchronous mode) Microphone clock control via PLL
  • DMI-2 portable Synchronization: automatically to an external word clock or AES11 signal, if present, otherwise the internal word clock generator is activated
  • Word Clock (or AES11) Input: BNC
    • Vin: >100 mV at 75 ohms
  • Word Clock (or AES11) output: BNC
    • Vout: = Vin (external synchronization)
    • Vout: approx. 1.5 V at 75 ohms (internal word clock generator)
  • Internal word clock generator: 44.1 / 48 / 88.2 / 96 kHz/176.4 / 192 kHz, Accuracy ±25 ppm
  • Control elements: 2x push-switch rotary encoder
  • CTL (Control interface): 1x USB port
  • Power supply: DC 10-18 V (Hirose) , NP1 rechargeable battery or AC/DC converter
  • Power consumption: < 8 VA
  • Dimensions: (W x H x D) 186 x 44 x 126 mm
  • Weight: approx. 625 g