Accessories for Modular Synthesizers

Doepfer A-100KMG Rotary Knob (Magenta) Quality Replacement for A-100 Modules, available in a Range of Colours

Doepfer A-100KOR Rotary Knob (Orange) Quality Replacement for A-100 Modules, available in a Range of Colours

Doepfer A-100KRD Rotary Knob (Red) Quality Replacement for A-100 Modules, available in a Range of Colours

Doepfer A-100KWH rotary control (white) – high-quality replacement for A-100 modules, available in various colours

Doepfer A-100KGN Rotary Knob (Green) Quality Replacement for A-100 Modules, available in a Range of Colours

Doepfer A-100KYE Rotary Knob (Yellow) Quality Replacement for A-100 Modules, available in a Range of Colours

10 pin - 16 pin Eurorack power cable for modular synthesizers, link between backplane and Eurorack module

Doepfer A-100KBL Rotary Knob (Blue) Quality Replacement for A-100 Modules, available in a Range of Colours

Doepfer A-100KV Rotary Knob (Vintage) Quality Replacement for A-100 Modules, available in a Range of Colours

With the Erica Synths 6-pin Drum Module Cable it is possible to connect the Erica Drum Sequencer with the Erica Drum Modules within the modular case. CV, Gate Trigger, Drum, Modular, Modular System...

Jumper for connecting adjacent jacks on Buchla synthesizers.

Adapter cable for electronic musical instruments and Eurorack modules with TRS connectors to connect to MIDI equipment.

Adapter cable for electronic musical instruments and Eurorack modules with TRS connectors to connect to MIDI equipment.

Airtight storage box with Intellijel logo

Internal trigger cable for connecting Erica Drum Sequencer to Erica Drum Modules.

The Wrench Tool from Befaco is a special tool for loosening and tightening the coloured bananuts. CV, Eurorack, Modular, Modular System

The 28cm long barrel cable (Right Angle) of 4ms was designed to connect two Row Power modules mounted on top of each other and to supply both units with power from the same source. CV, gate, power,...

Practical adapter for extending Flying Bus cables and busboards in the Eurorack system.

Airtight storage box with Intellijel logo

Synthrotek, Power Up!, Mini Power Distribution Board, Daisychain, Molex, Power, Power Supply, Power

3.5mm passive attenuator cable, Length: 3.5mm, Slider in the middle, Input jack socket + output jack socket

Koma Elektronik cable hanger extra arm, patch cables, Eurorack, modular system, organize, order, hang up

Synthrotek, Power Up!, Mini Power Distribution Board, Daisychain, Molex, Power, Power Supply, Power

Synthrotek, Power Up!, Mini Power Distribution Board, Daisychain, Molex, Power, Power Supply, Power

Specially designed M3 screws with their own washer that can be fastened without a screwdriver.

Adapter cable for electronic musical instruments and Eurorack modules with TRS connectors to connect to MIDI equipment.

Adapter cable for electronic musical instruments and Eurorack modules with TRS connectors to connect to MIDI equipment.

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

The Bananuts from Befaco are coloured exchange nuts for 3,5mm jack sockets. They are ideal for color coding function groups, assigning knobs to jacks and of course to personalize your favorite modu...

Set of three special cables for splitting and distributing signals.

Sixfold multiple in cable version

High quality manufactured brush for cleaning synthesizers and modules.

Koma Elektronik Field Kit DC Motor, DC Motor, Oscillator, Field Kit, Rotation, Speed via CV

Koma Elektronik Field Kit Solenoid, Push/Pull Motor, Magnetic, Field Kit, Trigger

Koma Elektronik Field Kit Electromagnetic Pickup, Broadband Receiver, Electromagnetic Radiation, Field Kit, Ether

Four-pole connection cable for backplanes

Shakmat Modular Serial Programmer, Bard Quartet, Expand, Update, Firmware, Shakmat, Modular, Eurorack

The Extended Ribbon Cable Pack from Intellijel contains 6 ribbon cables for converting the 1U modules in the 7U case.

1-to-5 signal splitter, for 3.5mm jack, jack splitter for patch cables, for modular synthesizers, color: red.

Eurorack mount cable hanger, 2 x 20 teeth, Trailer and front panel: 2mm thick aluminium, powder coated white, 2HP, 21cm

Koma Elektronik Field Kit Contact Microphones, Gate, Trigger, Field Kit, Contact Microphone, Set

The Linear Softpot from Koma Elektronik is a Ribbon Controller Interface/Sensor to control the Field Kit from the same manufacturer. Field Kit, CV, Eurorack, Modular, Modular System, Ribbon, Contro...

Koma Elektronik cable hanger 2 Arms, patch cables, Eurorack, modular system, organize, order, hang up

Set of 20 Nest Tamers, more overview and ergonomics, practical cable routing, easy installation

The Cable Holder is the perfect tool for keeping patch cables tidy.

Koma Elektronik Field Kit FX Spring Tank, spring reverb, 8BB3C1B tank, vintage sound, field kit, RCA, reverb, analogue

Befaco Knurlies are screws that have been specially developed for Modular Synthesizer . The special thing about them is that they can be screwed in using Hand a cross-head, slotted or hexagon s...

Illuminated connectors for making control voltages visible in Eurorack modular systems and semi-modular synthesizers.

Connectors for two TipTop Audio Mantis Cases

Connectors for two TipTop Audio Mantis Cases

Connectors for 2 Eurorack GO from Behringer. Enables ergonomic operation and saves space.

Sensor set, accelerometer, Capactive Touch, sequential voltage source, haptic/sensory extension, CV, Eurorack, modular system

Intellijel Metropolix, sequencer, USB/MIDI port, Palette 62, Palette 104, 7U Performance Case, Eurorack, MIDI

The Field Kit Sensor Pack A from Koma Elektronik adds sensory functions to the "Field Kit experimental box". Button & Jack, Temperature Sensor, Light Sensor, Ball Switch, Electret Microphone, CV, E...

Patch cable holder for approx. 240 Eurorack cables with small parts compartment, synth duster slot and headphone holder.

Tiptop Audio True Stereo Card Bundle, Effects, Stereo Echo, Delay, Chorus, Flanger, Pitch, Filter, Stereo, Eurorack, Mix

High quality transport bag with handle and shoulder strap for the Palette 104 Case.

This practical tabletop stand ensures ergonomic working with 104 TE Eurorack cases.

• 1 × Befaco Noodler
• 1 × MUSIC STORE Mic-6 MkII Round-Base (Black)
and 0 further items …

Connectors for 3 Mantis Cases from TipTop Audio. Allows ergonomic operation and saves space.

Connectors for three black Mantis cases from TipTop Audio. Enables ergonomic operation and saves space.

The Wave Ring from Genki Instruments is a new kind of performance controller that is worn like a ring on a finger and transmits gestures. LED, Matrix, Wireless, Bluetooth, USB, DAW, OSX, Win, iOS, ...