Neutrik NC3MX-HD-B Cable Plug

Specifications:

• Capacitance between contacts: ≤ 4 pF
• Contact resistance: ≤ 3 mΩ
• Dielectric strength: 1.5 kVdc
• Insulation resistance: > 10 GΩ (initial).
• Rated current per contact: 16 A
• Rated voltage: < 50 V
• Cable diameter: 3.5 - 8 mm
• Insertion force: ≤ 20 N
• Insertion force: ≤ 20 N
• Service life: > 1000 mating cycles
• Conductor cross-section: max. 2.5 AWG
• Conductor cross-section: max. 14 AWG
• Connection type: Solder contacts
• Latch lock: Latch lock
• Bend protection: Polyurethane
• Clamping sleeve: Stainless steel
• Contact coating: 0.2 µm Au hard alloy over 2 µm Ni
• Contacts: Brass (CuZn39Pb3)
• Insert: Polyamide (PA66)
• Locking element: Stainless steel
• Housing: Stainless steel
• Housing coating: Black chromium
• Strain relief: Polyacetal (POM)
• Sealing jacket: EPDM
• Approvals: UL
• Flammability: and 94 V-0
• Standards compatibility: IEC 61076-2-103
• Protection class: IP 65
• Solderability: Complies with IEC 68-2-20
• Temperature range: -30 °C to +80 °C

The three-pole Neutrik NC3MX-HD-B is a particularly robust cable connector of the X-HD series for use in harsh environments. It has numerous advantageous features to ensure long-term good performance. A stainless steel housing with rubber seal is used here to reliably shield the inside of the connector from dirt particles and splash water (IP 65). Additional protection is provided by a kink protector that prevents the cable from being torn off or kinked at the connector end under mechanical stress. For clean signal transmission, the contacts are provided with a corrosion-resistant gold coating.