The Art & Lutherie Roadhouse Havana
The top is the upper part of the guitar body and a wafer-thin semi-glossFinish:
The term "finish" refers to the outer coating or surface treatment of a guitar. It can be different types of varnish, stain or oil that are applied to the wood to protect it and give it an attractive appearance. finish. At the same time, the shortened neckGuitar neck:
Maple neck offers excellent playability in all 18 fretsFret:
Jumbo frets. The open tunersTuners:
die-cast tuners with 16:1 ratio make it very easy to tune the instrument. To ensure that the Parlor guitarParlor guitar:
The Parlor guitar is a smaller acoustic guitar with a compact body and a pleasant sound. It was developed to be easier to transport and is particularly suitable for fingerpicking and blues music. can also be used on stage without any problems, the in-house Q-DiscretePickup:
A pickup is an electronic component that converts the vibrations of the guitar strings into electrical signals. These signals are then amplified and played back via loudspeakers to make the sound of the guitar audible. pickup system is built into the bodyBody:
The body is the body of a guitar. It is made of wood and influences the sound and resonance of the instrument. The sound of a guitar can vary depending on the shape and material of the body., the output signal of which can be individually adjusted via two potentiometers on the top. The acoustic guitarAcoustic guitar:
The acoustic guitar is an acoustic guitar with steel strings. It is often used for folk is visually rounded off by the striking Havana Brown finish and the eye-catching pearloidPickguard:
The pickguard is a plate made of plastic or wood that is attached to the front of a guitar. It protects the wood from scratches and serves as a base for striking the strings with a pick. pickguard.
The top is made of solid cedar to ensure that the sound develops quickly and comprehensively. This also ensures strong mid-range and restrained treble frequencies, making the Parlor guitar ideal for
The term "back" refers to the lower part of a guitar, which serves as a resonating body. It is usually made of wood and influences the sound and volume of the instrument. and sidesFrame:
The frame is the side part of the guitar body that surrounds the cavity. It is usually made of wood and contributes to the stability and resonance of the guitar. made from laminated Canadian wild cherry enrich the sound with warm and subtle bass frequencies. Thanks to the neck/body transition at the 12th fret, the Silver Leaf Maple neck can be played on the entire rosewood fingerboardFretboard:
The fretboard is the part of the guitar on which the strings are fretted to produce different tones. It is made of wood and has metal frets that mark the different pitches. comfortable to use. The bridgeBridge:
Bridge is also made of rosewood.
To ensure clean intonationIntonation:
Intonation refers to the correct tuning of the individual strings of a guitar. Adjusting the scale length ensures that all notes played on a string sound at the correct pitch. over the entire 631 mm scaleScale length:
The scale length refers to the length of the vibrating string of a guitar. It determines the distance between the nut and the bridge and influences the sound and playability of the instrument. length, the manufacturer relies on a compensated bridge inlaySaddle:
The saddle is a small piece of material that is placed in the bridge of a guitar. It helps to keep the strings at the right height above the fretboard and ensures a clear sound and good playability of the guitar. and a 44 mm wide nutNut:
The nut is a small piece of hard material that sits at the top of the guitar neck. It has notches into which the strings are inserted to ensure the correct spacing and height. made of
chrome hardware hardware enable precise tuning. Discreet dot inlaysInlays:
inlays are worked into the fretboard for orientation, contrasting the rough-grained wood in a very pleasant way. The top of the Art & Lutherie Roadhouse Havana
Binding refers to the decorative edging of the guitar body. It is made of wood that is perfectly matched to the single-ringRosette:
The rosette is a decorative element on the guitar. It is located around the sound hole and is made of various materials such as wood or mother-of-pearl. The rosette gives the guitar an aesthetic appearance and can also influence the sound. soundhole rosette and the pickguardPickguard:
The pickguard is a plate made of plastic or wood that is attached to the front of a guitar. It protects the wood from scratches and serves as a base for striking the strings with a pick..