Shure SM27 Large Diaphragm side address microphone

The SM27 is a rugged and versatile large-diaphragm, side-address cardioid condenser microphone. It has low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. Durable Shure construction features three separate mesh layers that reduce wind and breath noise. Equally comfortable on stage or in the studio.

• Cardioid polar pattern—the most commonly used pattern for both studio and live applications
• 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass, Mylar® diaphragm provides superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response and no crossover distortion, while minimizing harmonic and intermodulation distortions
• Premium electronic components and gold-plated internal and external connectors
• Subsonic filter eliminates rumble from mechanical vibration below 17 Hz
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect
• Integrated three-stage “pop” protection grille reduces plosives and other breath noise
• Internal shock mount reduces handling and stand noise

• Type: Condenser (externally biased)
• Frequency Response: 20 to 20,000 Hz
• Polar Pattern: Cardioid
• Impedance: 150 Ω (140 Ω actual)
• Sensitivity (at 1 kHz, open circuit voltage): −37 dBV/Pa 1 Pascal=94 dB SPL
• Maximum SPL: (1 kHz at 1% THD) 1000 Ω load: 133 dB (147 dB, Pad on) 2500 Ω load: 138 dB (152 dB, Pad on)
• Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 84.5 dB
• S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
• Dynamic Range (at 1 kHz): 1000 Ω load: 123 dB / 2500 Ω load: 128 dB
• Common Mode Rejection (20 Hz to 20 kHz): > 50 dB
• Clipping Level (20Hz-20 kHz at 1% THD) 1000 Ω load: 1 dBV / 2500 Ω load: 7 dBV
• THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
• Self Noise (typical, equivalent SPL, A-weighted): 9.5 dB
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight Net: 642 g (22.6 oz.)
• Switch Attenuator: -15 dB
• Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
• Connector Three-pin professional audio (XLR), male
• Power Requirements 48 Vdc phantom, 5.4 mA