Doepfer A-100LC3 Корпус для модульных синтезаторов

The Doepfer A-100LC3 Eurorack Modular Synthesizer Case is the 3U version of the low cost cases A-100LC6/LC9. The A-100LC3 is very similar to the A-100LC6 but offers only one row with 84 HP for installation of modules. A-100LC3 is equipped with one power supply (1200mA) and one bus board. Because of the limited space the power suppy of the DIY-Kit #1 with an external transformer is used (same as for the DIY-Kit #1). At the left side of the case the connector for the external transformer is located. The external transformer is not shown in the pictures. The case is made of raw wood without lacquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can (like the pictures that shows a black and a blue varnished version).

The main features of the Doepfer A-100LC3 Eurorack Modular Synthesizer Case include:  

• Outside: approx. 445 (width) x 160 (depth) x 150 (height)
• Inside: 1 x 84 HP x 3 U (one bus board), useable depth for A-100 modules: approx. 110 mm (measured from inner side of the front panel until end of the pc board of the module)
• Weight (without modules): about 2.5 kg without external transformer, about 3.5 kg with external transformer
• Mains voltage: 115V~ or 230V~ (please specify when you order)
• Output voltages/current: +12V/1200mA, -12V/1200mA